Keyless Access for Versatile Storage Solutions

Desk Mate

Model:

2597-S

Outer dimension w/door closed:

7½" x 10½" x 2½"

Outer dimension w/door open:

7½" x 11¾" x 4"

Inner dimension:

6½" x 8¼" x 1¾”

Ship Wt.

8 lbs.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

Place mouse over image for view of open case with optional tray. Shown with optional Universal Mounting Bracket (UBDM).


Standard Features

  • Designed to install under most surfaces with included Quick Release Mounting Bracket (MBDM).
  • Front opening case door drops down for easy access.
  • Desk Mate may also be installed sideways with the top bolted to the side of a surface and the door on the top.
  • Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code.
  • No keys to lose or batteries to change.
  • One Quick Release Mounting Bracket (MBDM) is included with each Desk Mate for easy installation under most surfaces.
  • Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location.
  • 3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
  • The door is recessed for added pry protection.
  • Anti-Pry brackets in the interior provide additional strength and security.
  • Available in textured semi-gloss black powder coated finish.
  • Continuous hinge is welded on one end to prevent pin removal.
  • An optional Universal Mounting Bracket (UBDM) is available to enable the case to be installed on top of most surfaces.
  • Accented with gold tone pinstripe and logo design.

Quick Release Mounting Bracket

Model:

MBDM

Outer Dim:

7"x 9"

Ship Wt.

2 lbs.

Optional Accessory

  • Mounting Bracket allows your Desk Mate to be transported.
  • Lock tabs and thumb screws allow easy transfers, no tools are necessary to transfer case between brackets.
  • Prepunched holes enable the case to be installed directly to most surfaces.
  • For optimum security V-Line highly recommends all Security Cases be properly installed.
  • Recommended installation hardware: 4 each ¼" x 1" - 1½" lag bolts and 4 each ¼" flat washers (not included).

Tray for Desk Mate

Model:

TRDM

Outer dimension:

7¼" x 8½" x 1¾"

Ship Wt.

3 lbs.

Optional Accessory

  • This Drawer option slides into Desk Mate to allow easier access to contents.
  • Drawer is felt lined to protect contents.

Universal Mounting Bracket

Model:

UBDM

Outer dimension:

8¼" x 4"

Ship Wt.

4 lbs.

Optional Accessory

  • Includes one special wrench to install supplied tamper proof screws.